Employee Safety Training & Resources

These resources are used to give employees more in-depth training and resources to help continue education about SMS and can be used to help the safety manager build a successful and sound SMS program.

Scroll down this page to find helpful documents, links and videos divided into these six sections:

Section One:    SMS Safety Training and Resources
Section Two:    Fixed-Wing Specific Training
Section Three:  Helicopter Specific Training
Section Four:   Maintenance and Ground Operations Training
Section Five:    General Safety Training
Section Six:      OSHA Training and Resources

Section One: SMS Training and Resources

Hazard Reporting
This module describes the characteristics of an effective hazard identification and resolution process for your operation and is designed to enhance the risk management pillar of your Safety Management System.
Risk Management
This Safety Training Element Risk Management. This module is designed to enhance the risk management pillar of your Safety Management System.
Internal Evaluation Program (IEP)
This module describes the fundamentals, implementation, and execution of an Internal Evaluation Program. It is designed to enhance the safety assurance pillar of your Safety Management System.
Hazard Reporting Flow Chart
This flow chart helps a manager and user understand the process in which a hazard report can be filled and closed. A user can adjust and tailor this process as needed.

Section Two: Fixed-Wing Specific Training

Cabin Crew Fire Fighting
This course is designed to give an employee information on how to deal with a inflight fire.
Extinguishing In-Flight Laptop Computer Fires
This course is designed to give employees a way to handle inflight laptop fires.
Airplane Upset Recovery
This is a two-part course designed to help teach pilots about Airplane Upset Recovery.

Section Three: Rotary-Wing Specific Training

Section Four: Maintenance and Ground Operations Training

Aircraft Ground Handling Damage Prevention
This training provides best practices for preventing business aircraft ground damage events.

Section 5: General Safety Training

FAA TV: Top 10 Causes of GA Accidents
Great 34-minute video about the top 10 GA Accidents that is presented by a current FAA accident investigator.

Section 6: OSHA Safety Training and Resources

PRISM OSHA Checklist
The following checklist items may or may not be applicable to your company, and certain items may not fall within the company’s scope of responsibility. The checklist items are based upon Occupational Safety and Health Administration (OSHA) regulations, which are cited by hyperlinks within the document. There may be references to Material Safety Data Sheets (MSDS) in this information. MSDS has been replaced by Safety Data Sheets (SDS) as explained in OSHA Hazard Communications above
Alternate PRISM OSHA Self-Inspection Checklist for Small Entities
PRISM OSHA Regulations
Complying with the FARs (Federal Aviation Regulations) is a major focal point of every flight department. Complying with OSHA (Occupational Safety and Health) regulations, on the other hand, is a topic generally given lower significance by flight departments even though, interestingly enough, the number of injuries on the ground is statistically much higher than the number of injury occurrences in the air. There may be references to Material Safety Data Sheets (MSDS) in this information. MSDS has been replaced by Safety Data Sheets (SDS) as explained in OSHA Hazard Communications above.
OSHA Hazardous Chemicals Labels and Pictograms Overview
The following resources can be used to help your organization comply with OSHA's latest Hazard Communication rules & regulations.
OSHA Training Requirements for the Revised Hazard Communication

Blood Borne Pathogens PPE Manager Training

PPE Training
These resources are used to help your organization comply with OSHA's blood borne pathogen rules & regulations.

OSHA Specific Training

Introduction to OSHA
This course is designed to give employees a basic understanding about OSHA.
Basic First Aid
This course is designed to give employees a basic set of first aid skills and knowledge.
Fire Protection & Extinguishers
This course is designed to give employees a basic understanding of fire protection and fire extinguisher use.
Hand and Power Tool Safety
This course is designed to teach employees how to safely use, hand & power tools. This course also provides help with identifying various types of tools and required PPE that should be used while working with specific tools.
Hazard Communication Training
This course is designed to teach employees about HAZCOM and SDS sheets.
Hearing Conservation Training
This course is designed to teach employees about the Hearing protection and hearing conservation.
Hydrogen Sulfide (H2S) Safety Training
This course is designed to teach employees about the basic dangers of Hydrogen Sulfide (H2S).
Portable Ladder Safety Training
This course is designed to teach employees about the basic dangers of using ladders in the workplace and how to prevent injuries while using ladders.
Lockout-Tagout Safety Training
This course is designed to teach employees about the basic Lockout-Tagout procedures and policies that should be followed to prevent injuries.